Canon EOS 650D - Page 161

161
Changing the Autofocus Method (AF Method)
3
Focus the subject.
 Aim the AF point over the subject and
press the shutter button halfway.
 The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed. (No picture is
taken.)
 When focus is achieved, the AF point
that achieved focus will turn green
and the Live View image will
reappear.
 If focus is not achieved, the AF point
will turn orange and blink.
4
Take the picture.
 Check the focus and exposure, then
press the shutter button completely to
take the picture (p.144).
 When [Quick mode] is set, [Continuous AF] cannot be set (p.150).
 The [Quick mode] cannot be set for movie shooting.
You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.
www.devicemanuals.eu
and the Live View image will
www.devicemanuals.eu
and the Live View image will
If focus is not achieved, the AF point
www.devicemanuals.eu
If focus is not achieved, the AF point
will turn orange and blink.
www.devicemanuals.eu
will turn orange and blink.
Take the picture.
www.devicemanuals.eu
Take the picture.
Check the focus and exposure, then
www.devicemanuals.eu
Check the focus and exposure, then
press the shutter button completely to
www.devicemanuals.eu
press the shutter button completely to
take the picture (p.144).
www.devicemanuals.eu
take the picture (p.144).
www.devicemanuals.eu