79
In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot
while the settings match the lighting or scene type. Normally,
[ Default setting] is adequate, but if the settings match the lighting
condition or scene, the picture will look more accurate to your eye.
For Live View shooting, if you set both [Light/scene-based shots] and
[Ambience-based shots] (p.76), you should first set [Light/scene-
based shots]. This will make it easier to see the resulting effect on the
LCD monitor.
1
Set the Mode Dial to any of the
following modes: <2>, <3>,
<4> or <5>.
2
Display the Live View image.
With the Live View image displayed,
you can see the resulting effect.
Press the <A> button to switch to
Live View shooting.
Shoot by Lighting or Scene Type
Lighting or Scene 2 3 4 5
Default setting
k k k k
Daylight
k k k k
Shade
k k k k
Cloudy
k k k k
Tungsten light
k k k
Fluorescent light
k k k
Sunset
k k k k
To Next Page
Loading...
