Shoot by Lighting or Scene Type
80
3
On the Quick Control screen,
select the lighting or scene type.
Press the <Q> button (7).
Press the <V> key to select [
Default setting]. [Light/scene-
based shots] will appear on the
screen.
Press the <U> key or turn the
<6> dial to select the desired
lighting or scene type.
The LCD monitor will show how the
image will look with the selected
lighting or scene type.
4
Take the picture.
To shoot while the Live View image is
displayed, press the shutter button.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [ Default
setting].
If you use flash, the setting will switch to
[ Default setting].
(However,
the shooting information will display the lighting or scene type that was set.)
If you want to set this together with [
Ambience-based shots
], set the
[
Light/scene-based shots
] that best matches the ambience you have
set. In the case of [
Sunset
] for example, warm colors will become
prominent so the ambience you set may not work well.
If you do not want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. Pressing the <Q> button will
display the Quick Control screen. You can then set [Light/scene-based
shots] and shoot with the viewfinder.
To Next Page
Loading...
