153
You can select the AF method suiting the shooting conditions or subject. The
following AF methods are provided: [
u(face)+Tracking
], [
FlexiZone -
Multi
] (p.155), [
FlexiZone - Single
] (p.156), and [
Quick mode
] (p.160).
AF methods other than the [Quick mode] use the image sensor to
autofocus while displaying the Live View image.
Select the AF method.
Under the [
A
] tab, select [
AF method
].
Select the desired AF method, then
press <0>.
While the Live View image is
displayed, you can also press the
<Q> button to select the AF method
on the Quick Control screen (p.149).
Human faces are detected and focused. If a face moves, the AF point
<p> also moves to track the face.
1
Display the Live View image.
Press the <A> button.
The Live View image will appear on
the LCD monitor.
2
Select an AF point.
When a face is detected, the <
p
> AF point
will appear over the face to be focused.
If multiple faces are detected, <q>
will be displayed. Press the <U>
key to move the <q> frame over
the desired target face.
You can also tap the LCD monitor screen
to select the face or subject. If the subject
is not a face, < > will be displayed.
Changing the Autofocus Method (AF Method)
Selecting the AF Method
u(face)+Tracking:
c
To Next Page
