Canon EOS 650D - Page 308

Using Eye-Fi Cards
308
5
Check the [Access point SSID:].
 Check that an access point is
displayed for [Access point SSID:].
 You can also check the Eye-Fi card’s
MAC address and firmware version.
 Press the <M> button three times
to exit the menu.
6
Take the picture.
 The picture is transferred and the
<H> icon switches from gray (not
connected) to one of the icons below.
 For transferred images, O is
displayed in the shooting information
display (p.266).
H(Gray) Not connected : No connection with access point.
H(Blinking) Connecting : Connection with access point.
H(Displayed) Connected : Connection to access point established.
H(  ) Transferring : Image transfer to access point in progress.
Transmission status icon
www.devicemanuals.eu
The picture is transferred and the
www.devicemanuals.eu
The picture is transferred and the
> icon switches from gray (not
www.devicemanuals.eu
> icon switches from gray (not
connected) to one of the icons below.
www.devicemanuals.eu
connected) to one of the icons below.
For transferred images,
www.devicemanuals.eu
For transferred images,
displayed in the shooting information
www.devicemanuals.eu
displayed in the shooting information
display (p.266).
www.devicemanuals.eu
display (p.266).
: No connection with access point.
www.devicemanuals.eu
: No connection with access point.
: Connection with access point.
www.devicemanuals.eu
: Connection with access point.
www.devicemanuals.eu
: Connection to access point established.
www.devicemanuals.eu
: Connection to access point established.
:
www.devicemanuals.eu
:
Image transfer to access point in progress.
www.devicemanuals.eu
Image transfer to access point in progress.