Canon imageclass MF232W - Page 421

Environmental Conditions
Temperature: 10 to 30°C
Humidity: 20% to 80% RH (no condensation)
Host Interface
100BASE-TX
*4
10BASE-T
*4
Hi-Speed USB
IEEE 802.11b/g/n (Infrastructure mode)
*4
Noise
(measured in accordance with ISO 7779, declared
noise emission in accordance with ISO 9296)
LwAd (Declared A-weighted sound power level (1 B = 10 dB))
- MF244dw
During standby mode: Inaudible
*5
During printing: 6.6 B or less (1-sided)
During printing: 6.6 B or less (2-sided)
- MF241d
During standby mode: Inaudible
*5
During printing: 6.6 B or less (1-sided)
During printing: 6.7 B or less (2-sided)
- MF232w
During standby mode: Inaudible
*5
During printing: 6.6 B or less (1-sided)
LpAm (Declared A-weighted emission sound pressure level (Bystander
position))
- MF244dw / MF241d
During standby mode: Inaudible
*5
During printing: Approx. 52 dB (1-sided)
During printing: Approx. 52 dB (2-sided)
- MF232w
During standby mode: Inaudible
*5
During printing: Approx. 51 dB (1-sided)
Acceptable Documents
Supported Document Types(P. 417)
Acceptable Paper Stock
Paper(P. 419)
Printable Range
Printable Area(P. 420)
Scan Range
Scan Area(P. 418)
*1
The current value displayed on the rating label indicates average current consumption.
*2
Warm-up time may vary depending on the use conditions and environment of the machine.
*3
The value indicates the mass of the main unit including toner cartridges.
*4
MF244dw / MF232w only
*5
Indicates that the sound pressure level of each bystander position is below the ISO 7779 absolute criteria for the background noise level.
Appendix
415