Canon imagePROGRAF iPF605 User Manual

Printer Specications
Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi horizontally ( *1 ) × 1200 dpi vertically
Printhead PF-03
Number of nozzles MBK: 5,120; Others: 2,560 each color
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
Expansion Board Slots 1
Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
USB 2.0( *1 )
Connector Series B (4-pin)
Format Internal port
Specication IEEE 802.3 10BASE-T , IEEE 802.3u 100BASE-TX
/Auto-Negotiation, and IEEE 802.3x Full Duplex
Ethernet
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP , HTTP , TCP/IP ,
AppleT alk
Format Optional boards (slot type)
Specication IEEE 1394-1995, conforms to P1394a Specication ver . 2.0,
half duplex, Data/Strb dif ferential serial
T ransfer speed 100/200/400 Mbps
IEEE 1394 ( *2 )
Connector Conforms to IEEE 1394-1995 (6-pin), no power supply
*1: Use in USB 2.0 High Speed mode requires the following environment:
• Computer: USB 2.0 High-Speed-compatible
• Operating system: Windows V ista/Windows Server 2003/Windows XP/Windows
2000 or Mac OS X ver . 10.3.3 or later
• USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
• USB cable: Certied USB 2.0 cable
*2: One IEEE 1394 (FireWire) expansion board can be installed.
Printer Parts 77

Canon imagePROGRAF iPF605 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Interface	USB 2.0, Ethernet
Type	Large Format Printer
RAM Installed (Max)	256 MB
Ink Colors	Cyan, Magenta, Yellow, Black, Matte Black
Ink Droplet Size	4 picoliters
Operating Systems	Windows, Mac OS
Media Thickness	0.07 mm to 0.8 mm
Media Types	Plain Paper, Coated Paper, Proofing Paper