Responding to Messages
Error Messages
Error messages
Check the message and take the appropriate action.
• Borderless printng not possible. (→P .545)
• Cannot adjust band. (→P .548)
• Cannot adjust printhead. (→P .548)
• Cannot cut paper . (→P .544)
• Cannot detect papr (→P .543)
• Cannot feed paper . (→P .542)
• Cannot feed paper . (→P .544)
• Cannot print as specied. (→P .548)
• End of paper feed. (→P .544)
• ERROR Exxx-xxxx (x represents a letter or number) (→P .553)
• GARO Wxxxx (x represents a number) (→P .553)
• GL2: W0502 The parameter is out of range. (→P .552)
• GL2: W0504 This command is not supported. (→P .552)
• GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P .552)
• Hardware error . xxxxxxxx-xxxx (x represents a letter or number) (→P .553)
• Ink insuf cient. (→P .546)
• Ink Level: Check (→P .547)
• Ink tank error . (→P .547)
• No ink left. (→P .546)
• Insuf cient paper for job (→P .540)
• Maintenance cartridge full. (→P .551)
• Maintenance cartridge problem. (→P .551)
• Manual printing is selected, but a roll is loaded. (→P .542)
• Multi-sensor error (→P .554)
• No ink tank loaded. (→P .547)
• No Maintenance Cartridge capacity . (→P .551)
• No maintenance cartridge. (→P .551)
• No Roll Feed Unit. (→P .541)
• Paper jam. (→P .543)
• Paper loaded askew . (→P .543)
• Paper Mismatch (→P .538)
• Paper size not detected. (→P .539)
• Papr Size Mismatch (→P .539)
• Papr T ype Mismatch (→P .538)
• Parts replacement time has passed. (→P .554)
• PHead needs cleaning. (→P .549)
• Prepare for maint cart replacement. (→P .551)
• Prepare for parts replacement. (→P .554)
• Printhead error (→P .550)
• Problem with Printhead (→P .549)
• Roll feed unit err (→P .541)
• Roll printing is selected, but sheets are loaded. (→P .541)
• Roll printing is selected. (→P .540)
• Sheet printing is selected. (→P .542)
536 Error Message
To Next Page
Loading...
