EasyManuals Logo

Canon imagePROGRAF iPF605 User Manual

Canon imagePROGRAF iPF605
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #546 background imageLoading...
Page #546 background image
Other problems
Other problems
The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on
the printer .
The specied voltage is not supplied. Check the voltage of the outlet and breaker .
( P .76)
If the Printer Makes a Strange Sound
The following sounds do not indicate a problem with the printer .
There is a sound of vacuum from the Platen
T o prevent paper from rising, paper is held against the Platen by suction from V acuum holes under it.
Roll paper makes a uttering sound during printing
There may be a uttering sound when large paper is advanced.
If you suddenly hear the tone for cleaning operations
At regular intervals, for printer maintenance, cleaning operations will begin automatically , even if the
printer is in Sleep mode.
In other cases, contact your Canon dealer .
Messages advising to check the maintenance cartridge
are not cleared
Cause Corrective Action
Remove the new Maintenance Cartridge you have
just installed and insert it again rmly .
The printer has not detected the new Maintenance
Cartridge that was used to replace the old one.
Restart the printer .
The printer consumes a lot of ink
Cause Corrective Action
Many full-page color images are printed. In print jobs such as photos, images are lled with
color . This consumes a lot of ink. This does not
indicate a problem with the printer .
Head Cleaning B is used often. Head Cleaning B consumes a lot of ink. This does
not indicate a problem with the printer . Unless the
printer has been moved or stored for a long period
or you are troubleshooting Printhead problems, we
recommend not performing Head Cleaning B , to the
extent possible.
Y ou have just nished initial installation, when more
ink is consumed to ll the system.
After initial installation or at the rst-time use after
transfer , ink ows into the system between the Ink
T ank and Printhead , which may cause the ink level
indicators to drop to 80%. This does not indicate a
problem with the printer .
532 T roubleshooting

Table of Contents

Other manuals for Canon imagePROGRAF iPF605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF605 and is the answer not in the manual?

Canon imagePROGRAF iPF605 Specifications

General IconGeneral
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
InterfaceUSB 2.0, Ethernet
TypeLarge Format Printer
RAM Installed (Max)256 MB
Ink ColorsCyan, Magenta, Yellow, Black, Matte Black
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Media Thickness0.07 mm to 0.8 mm
Media TypesPlain Paper, Coated Paper, Proofing Paper

Related product manuals