Messages regarding ink
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action.
( → P .533)
Ink Level: Check
Cause Corrective Action
Not much ink is left. Prepare a new Ink T ank .
W e recommend replacing the Ink T ank with a new Ink
T ank at this point if you plan to print large-format or
high-quantity jobs.
No ink tank loaded.
Cause Corrective Action
There is no Ink T ank of the indicated color in the
printer .
Load or reload the Ink T ank .
( → P .470)
There is a problem with the Ink T ank . Replace it with a new Ink T ank .
( → P .470)
Ink tank error .
Cause Corrective Action
The Ink T ank in the printer is incompatible. Load an Ink T ank specied for use with the printer .
( → P .470)
The Display Screen indicates the system is lling with ink
Cause Corrective Action
When the printer was turned of f previously , some
cleaning operation was terminated.
W ait until the system has been lled with ink. This
process may take about ten minutes.
Error Message 547
To Next Page
Loading...
Need help?
General
