Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off
and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink
tanks, and follow this procedure again.
2. Disconnect the power cord and interface cable.
3. Open the Top Cover.
4. Pinch the Belt together, insert it between the Belt Stopper, and affix the Belt Stopper to the Carriage Shaft.
Maintenance and Consumables
>
Other Maintenance
>
Preparing to Transfer the Printer iPF6300S
11
1006
To Next Page
Loading...
