Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage the
printer.
Note
• Here, the Belt Stopper is the one that was removed and stored after initial installation.
5. Close the Top Cover.
6.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7. Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box.
Maintenance and Consumables
>
Other Maintenance
>
iPF6300S Preparing to Transfer the Printer
11
1007
To Next Page
Loading...
