• Roll paper width: 10 inches (254.0 mm)
1. This sets the B Format for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2. Select the printer in the APrinter list.
3. In the FPaper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Borderless.
Note
• Paper sizes supported for borderless printing are indicated by —Borderless.
4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then
select Print from the application software menu.
Enhanced Printing Options
>
Printing at full size
>
Borderless Printing at Actual Size (Mac OS X) iPF655
3
94
To Next Page
Loading...
Need help?
General