Stand
The printer can be mounted on the following Stand. When using an optional Stand, you can store documents printed on
rolls.
• Printer Stand ST-26
a.
Accessory Pocket
Stores printer accessories.
b.
Output Stacker
Printed documents are ejected into the output tray.
c.
Locking Caster
Lock to immobilize the caster.
Before moving the printer, always unlock all four casters. Moving the printer while casters are locked may scratch
the casters or the floor.
d.
Adjustable Stopper
Pull out when using the output stacker in the extended position.
e.
Paper Guide
Guides printed documents into the output stacker.
Note
• The Stand is normally offered as an optional accessory, but it may be provided as a standard accessory in
some sales regions.
Printer Parts
>
Optional accessories
>
Stand iPF655
9
746
To Next Page
Loading...
Need help?
General