No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead.
(See "Replacing the Printhead.") →P.797
Execute printhead cleaning.
Cause Corrective Action
The Printhead noz-
zles are clogged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing â–² or â–¼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.796
If this message is still displayed, replace the Printhead.
(See "Replacing the Printhead.") →P.797
Press â–² or â–¼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.796
If this message is still displayed, replace the Printhead.
(See "Replacing the Printhead.") →P.797
Error Message
>
Messages regarding printheads
>
No printhead iPF655
13
878