Canon imagePROGRAF iPF655 - Printing Banners or at Other Non-Standard Sizes; Printing Vertical or Horizontal Banners (Large-Format Printing)

Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format Printing) ..................................................................... 113
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) ................................................ 114
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) .............................................. 118
Printing on Non-Standard Paper Sizes ........................................................................................................... 122
Printing on Non-Standard Paper Sizes (Windows) ..................................................................................... 122
Printing on Non-Standard Paper Sizes (Mac OS X) ................................................................................... 127
Printing Vertical or Horizontal Banners (Large-Format Printing)
You can create vertical or horizontal banners by printing originals that are in banner format on rolls.
Originals created in Microsoft Word or other applications in your preferred size can be enlarged to fill the width of roll
paper by completing simple printer driver settings.
Fit Roll Paper Width
You can easily create vertical or horizontal banners by automatically enlarging or reducing originals to fit the full width of
rolls.
Note
• The maximum supported roll length is 18.0 m or 19.7 yd.
For instructions on printing vertical or horizontal banners, refer to the following topics, as appropriate for your computer
and operating system.
• Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) →P.114
• Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) →P.118
Important
• Before printing, check how much of the roll paper is left. If you have activated automatic detection of the
remaining roll paper, a warning message is displayed when there is not enough roll paper left.
• If not much ink is left, prepare replacement ink tanks.
• To print at a higher level of quality, in the printer driver, choose High or Highest in Print Quality, and
choose Unidirectional Printing as the direction of printing.
Enhanced Printing Options > Printing banners or at other non-standard sizes >
iPF655 Printing Vertical or Horizontal Banners (Large-Format Printing)
3
113