8. In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
9. Select and click a roll paper in the LPaper Source list.
10. Select the BBorderless Printing check box to display the Information dialog box.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12. Click OK to close the Information dialog box.
13. In CBorderless Printing Method, make sure E Scale to fit Roll Paper Width is selected.
14. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.205 "
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following ex-
ample.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Heavyweight Coated Paper
Enhanced Printing Options
>
Borderless Printing
>
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) iPF655
3
108
To Next Page
Loading...
Need help?
General