Removing the Roll Holder from Rolls
1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder.
2. Remove the Roll Holder from the roll.
3. When removing attachments, push the tips (a) in as you remove the attachment.
• 3-Inch Paper Core Attachment R ( Roll Holder side)
Handling Paper
>
Handling rolls
>
iPF655 Removing the Roll Holder from Rolls
7
639
To Next Page
Loading...
Need help?
General