Messages regarding printing or adjustment
Cannot adjust paper feed. ............................................................................................................................... 876
Check printed document. ................................................................................................................................ 876
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") →P.795
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") →P.796
4. Execute Adj. Quality again.
(See "Automatic Banding Adjustment (Adj. Quality).")
→P.674
Highly transparent film is loaded
that cannot be used for automatic
feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment (Adj. Quality).") →P.676
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") →P.796
Error Message
>
Messages regarding printing or adjustment
>
Cannot adjust paper feed. iPF655
13
876
To Next Page
Loading...
Need help?
General