Canon imagePROGRAF iPF655 - Configuring Netware Network Settings

8. In Print Application, click the print service to be used.
Note
• Only one print service selected here will be enabled. Multiple print services are not available at the
same time.
9. For packet signature, click If Requested by Server in Packet Signature.
10. Complete the following settings based on the selected service.
• If you have selected Bindery PServer: Queue Server Mode (Using a Bindery Print Server)
1. In File Server Name, enter the file server name.
2. In Print Server Name, enter the name of the print server created in "Specifying NetWare Print Serv-
ices →P.773 ."
3. In Print Server Password, enter the password of the print server created in "Specifying NetWare Print
Services →P.773 ."
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected RPrinter: Remote Printer Mode (Using a Bindery Print Server)
1. In Print Server Name, enter the advertising name of the print server created in "Specifying NetWare
Print Services
→P.773 ."
2. In Printer Number, enter the same printer number specified in "Specifying NetWare Print Serv-
ices
→P.773 ."
• If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1. In Tree Name and Context Name, enter the tree and context name of the print server.
2. In Print Server Name, enter the name of the print server created in "Specifying NetWare Print Serv-
ices →P.773 ."
3. In Print Server Password, enter the password of the print server created in "Specifying NetWare Print
Services →P.773 ."
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1. In Print Server Name, enter the advertising name of the print server created in "Specifying NetWare
Print Services
→P.773 ." Usually, the advertising name is the same as the name of the print server.
2. In Printer Number, enter the same printer number specified in "Specifying NetWare Print Serv-
ices →P.773 ."
11. Click OK to display the Network page.
For a list of NetWare protocol settings items, see "Configuring the Printer's NetWare Network Settings."
→P.768
Configuring NetWare Network Settings
To print over a NetWare network, configure the network environment as follows.
Network Setting
> Network Setting (Windows) >
Configuring NetWare Network Settings iPF655
10
776