1. This sets the BFormat for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2. Select the printer in the APrinter list.
3. In the FPaper Size list, click the size of the original. In this case, click ISO A4.
4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then
select Print from the application software menu.
Enhanced Printing Options
>
Conserving roll paper
>
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS X) iPF655
3
176
To Next Page
Loading...
Need help?
General