3. Click the Page Setup tab to display the Page Setup sheet.
4. Select and click a roll paper in the LPaper Source list.
5. Click NRoll Paper Options to display the Roll Paper Options dialog box.
6. To enable automatic cutting, click Yes in the A Automatic Cutting list. If you prefer to cut the paper later yourself,
click Print Cut Guideline.
7. Click OK to close the Roll Paper Options dialog box.
8. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.205 "
Roll paper will be automatically cut after printing.
Enhanced Printing Options
>
Other useful settings
>
Cutting Roll Paper After Printing (Windows) iPF655
3
196
To Next Page
Loading...
Need help?
General