Note
• If data analysis requires time, a message dialog will appear. If you select No, you will return to the
application.
5. Select Roll Paper Width that is set in the printer.
6. Select image size.
7. Select layout.
8. To configure Binding, click the Binding Settings button.
Refer to Configuring Binding (Excel) →P.350 for details on the procedure for configuring Binding.
9. Select Next.
10.
Select Media Type.
11. Enter Copies.
Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• Press the Print Preview button to display the preview screen. You can check and make changes to
the layout in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
12. If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper).
The upper and lower margins can be checked in Print Preview.
Windows Software
>
Print Plug-In for Office
>
iPF655 Print Selected Area (Excel)
4
349
To Next Page
Loading...
Need help?
General