Important
• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed
documents may not be dropped into the Output Stacker, and the printed surface may become soiled.
• When moving the printer, always lift the Support Rod to the Extended position before use in position (2). If
the stacker is not used in position (2), the Basket Cloth may touch the floor and be soiled or damaged.
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.
Note regarding the Extended position
The Output Stacker can be used in the regular position and an Extended position for easy removal of printed documents.
For information on types of paper you can use with the stacker in Extended position, refer to the Paper Reference Guide.
(See "Types of Paper.")
→P.620
Regular position Extended position
Switch the stacker to Extended position as follows.
Handling Paper
>
Output Stacker
>
Using the Output Stacker iPF655
7
662
To Next Page
Loading...
Need help?
General