• After printing on small paper
• After printing on paper that generates a lot of cutting debris
• If you have replaced the roll
• After printing on paper that generates a lot of paper dust
• After printing on adhesive paper
Important
• If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend cleaning
the Platen after borderless printing or printing on small paper.
• If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend clean-
ing the Ejection Guide even if it does not appear dirty, because it may actually be covered with paper dust.
• Printing on adhesive paper may leave adhesive on the Platen, Paper Retainer, or other parts. To prevent paper
jams, we recommend cleaning inside the Top Cover after printing.
1. Open the Top Cover.
Maintenance
>
Cleaning the Printer
>
Cleaning Inside the Top Cover iPF655
11
812
To Next Page
Loading...
Need help?
General