11. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, ISO A2/A3 (420.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Informa-
tion on the Main pane to update the printer information.
12. Make sure CPage Size on the Page Setup pane shows the original size as specified in C Paper Size in the Page
Attributes dialog box—in this case, ISO A4.
13. Select the DEnlarged/Reduced Printing check box.
14. Make sure EFit Paper Size is selected.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF655 Resizing Originals to Match the Paper Size (Mac OS X)
3
69
To Next Page
Loading...
Need help?
General