Canon imagePROGRAF iPF680 User Manual

Output Stacker
Output Stacker
Using the Output Stacker
Using the Output Stacker
This section describes how to use the Output Stacker.
Note
• The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
• The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different from the
appearance of your printer in some cases.
•
When storing printed documents on the Output Stacker
Use position (1). For details on how to use the Extended position which is a useful function for retrieving printed
matter, refer to the note regarding the Extended position. (See "Note regarding the Extended position.") ➔ P.399
• When the Output Stacker is not used, when loading paper, or when moving the printer
Use position (2).
When moving the printer, always lift the Support Rod to Extended position A before putting it in position (2), other-
wise the Basket Cloth may touch the floor and be soiled or damaged. (See "Switching to Extended position
A.") ➔ P.400
Important
• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed documents
may not be dropped into the Output Stacker, and the printed surface may become soiled.
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.
• The Output Stacker can hold printed documents from paper up to 36 inches (915 mm) long.
Note regarding the Extended position
The Output Stacker has a regular position and a position for easy removal of printed documents. Use the best position
for the paper size and orientation that you are using.
For information on the types and sizes of paper that the Extended position supports, refer to the following.
• Printer Stand ST-27: Output stacker operation guide (Included with the Printer Stand ST-27)
• Printer Stand ST-26: Paper Reference Guide (See "Types of Paper.") ➔P.360
Regular position
iPF680 Using the Output Stacker
User's Guide
Handling and Use of Paper Output Stacker
399

Canon imagePROGRAF iPF680 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Maximum roll length	18 m
Media width (rolls)	254 - 609.6 mm
Media width (sheets)	203.2 - 609.6 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Certification	RoHS
Product color	Black, Grey
Sound pressure level (printing)	47 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	757 mm
Width	997 mm
Height	507 mm