Canon imagePROGRAF iPF680 User Manual

Hardware error. 03130031-2F7x (x is 0, 1, or 2)
Cause Corrective Action
The ink tank is not
installed correctly.
Turn off the power, remove and then reinstall all of the ink tanks, and then turn on the power.
If the same message is displayed again, write down the error code and message, turn off the printer, and contact
your Canon dealer for assistance. (See "Replacing Ink Tanks.") ➔ P.540
Top cover is open.
Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is
open.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
Prepare for parts replacement.
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for
which service is required.
If "Parts replacement time has passed." is displayed, you can continue to use the print-
er for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance.
Unknown file.
Unknown file.
Cause Corrective Action
Data sent to keep the printer up to date (such as paper
information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
You have uploaded firmware for a different model. Check the firmware version. Turn off the printer and wait a while before restor-
ing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Multi-sensor error
Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
The performance of a sensor inside the printer may be
impaired.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is displayed again, contact your Canon dealer for assistance.
Error in cutter position.
Error in cutter position.
Cause Corrective Action
The Cutter Unit stops in the middle of cutting.
1.
Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
iPF680 Top cover is open.
User's Guide
Error Message Other Messages
627

Canon imagePROGRAF iPF680 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Maximum roll length	18 m
Media width (rolls)	254 - 609.6 mm
Media width (sheets)	203.2 - 609.6 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Certification	RoHS
Product color	Black, Grey
Sound pressure level (printing)	47 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	757 mm
Width	997 mm
Height	507 mm