Canon imagePROGRAF iPF680 - Network Environment

Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network (when using IPv4)
• Compatible operating systems
• Windows XP
• Windows Server 2003
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Server 2003 x64
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• OS X v10.6.8 or later
• Unix（Solaris 9）
• Unix（Red Hat 9）
•
Printing over a TCP/IP network (when using IPv6)
• Compatible operating systems
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• OS X v10.6.8 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring TCP/
IPv6 Network Settings" ➔P.491 or see "Configuring the Printer's TCP/IP Network Settings With Remo-
teUI." ➔P.492
• The imagePROGRAF printer driver is not compatible with Unix.
Network Environment
After confirming what type of network environment you will connect the printer to, set up the printer and computers as
needed. For the specifications of the network interface, see "Specifications." ➔ P.630
Network Environment
iPF680
User's Guide
Network Setting Network Environment
484