Canon imagePROGRAF iPF680 - Resizing Originals by Entering a Scaling Value

9 Make your selection in the F Print Quality list.
10
Access the Page Setup pane.
11 Select and click a roll paper in the A Paper Source list.
12 Select the paper width of the roll loaded in the printer for B Roll Width. In this case, 16 in. (406.4mm) is selec-
ted.
13 Select the D Enlarged/Reduced Printing check box.
14 Click F Fit Roll Paper Width.
15 Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.279
Resizing Originals by Entering a Scaling Value
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
• Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
• Scaling
Enlarge or reduce originals by a particular amount, as desired.
iPF680 Resizing Originals by Entering a Scaling Value
User's Guide
Enhanced Printing Options Printing enlargements or reductions
71