Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
• When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters are
not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the support
rod to the position shown (a) and unlock all four cas-
ters. Moving the stand with the support rod lowered or
the casters locked may cause injury or damage the
area of installation or basket cloth.
Install the printer
1
Install the printer on a table or other flat surface.
If you will use the printer on an optional Stand, assem-
ble the Stand before mounting the printer on it, and
then secure it with the Main Unit Securing Bolts.
Reinstalling the Printer
iPF680
User's Guide
Maintenance and Consumables Other Maintenance
572
To Next Page
Loading...
