Three-sided Borderless Printing on Roll Paper
In normal borderless printing, paper sizes that match the width of the roll paper are combined to print without
borders on all four sides.
If you use the three-sided borderless printing feature, you can combine paper sizes that don't match the
roll paper width, and print with no borders on three sides. However, if you perform three-sided borderless
printing, you need to cut the right side of the paper after printing.
Three-sided Borderless Printing to Match Paper Size
The procedure for three-sided borderless printing by enlarging or reducing documents to match paper size
is described below.
1.
Open the printer driver setup window
1.
2. Select the paper source2.
From the Paper Source list on the Page Setup tab, select Roll Paper.
3. Select paper roll width3.
For paper roll width, enter the same value set in the printer under Roll Paper Width.
4.
Select borderless printing
4.
In the Page Setup tab, place a checkmark next to the Borderless Printing option.
147
To Next Page
Loading...
Need help?
General