Lines or colors are misaligned
Check 1
Adjust the position of the Print head
If borders are misaligned or the print results are not uniform, adjust the position of the Print head.
Automatic Adjustment to Straighten Lines and Colors
For photo paper and proof paper, it may be improved by setting Paper thickness (head height) to a value lower
than the current setting and then adjust the position of the Print head.
Changing the Print Head Height
Check 2
Does the paper loaded on the printer match the media type selected in the
printer driver?
When printing with the media type specified in the printer driver, load the specified media type in the printer.
Loading Rolls in the Printer
Loading Sheets in the Printer
When printing with the media type loaded in the printer, specify the media type in the printer driver.
Printing with Easy Setup (Windows)
Printing with Easy Setup (macOS)
Note
•
When Auto (Use Printer Settings) is selected for the media type, printing is performed with the media
•
type loaded in the printer.
• Click Get Information to reflect the paper information set in the printer to the printer driver.•
Check 3
When loading paper in the printer, is the media loaded the same as the media
type selected on the touch screen?
Set the correct media type on the touch screen.
Changing the Type of Paper
Check 4
Adjust the angle of the Print head
Select Print head angle adjustment from the touch screen menu to adjust the Print head angle.
Adjusting Line Misalignment
661
To Next Page
Loading...
Need help?
General