Adjusting Vacuum Strength
When printing on heavyweight paper or paper that curls or wrinkles easily, if the Print head rubs against
paper, adjusting the level of suction against paper on the platen may improve results.
Important
• Paper rubbing against or becoming caught on the Print head may jam or result in printed documents
that are soiled.
1.
On the HOME screen, select the paper setting display area.
1.
2. Select Paper settings.2.
3. Select Advanced.3.
4. Select Transport unit vacuum strength.4.
5.
Select vacuum strength.
5.
568
To Next Page
Loading...
Need help?
General