Warning Message is Displayed When Performing Color Calibration
In the following cases, perform color calibration again or create a color calibration target.
• A warning message is displayed when performing color calibration.•
• A warning message is displayed when creating a color calibration target.•
• An error was seen in the print result when printing on a calibrated sheet.•
An example of a warning message
Please check the following:
• The print head nozzles are not blocked.•
• The paper is not curled or bent.•
• The paper is loaded correctly.•
• Paper settings are specified correctly.•
• The paper size is compatible with color calibration.•
Performing Color Calibration
708
To Next Page
Loading...
Need help?
General