Stamp Printing
The Stamp function allows you to print a stamp text over or behind document data.
"DRAFT," "CONFIDENTIAL," and other stamps that are used often in companies are pre-registered.
The procedure for printing with a stamp is as follows:
1. Open the printer driver setup window1.
2.
Select stamp
2.
On the Layout tab, select the Stamp check box, and then select the stamp to use from the list.
The current settings are displayed in the settings preview on the left side of the Layout tab.
3.
Complete the setup
3.
Click OK.
When you execute print, the data is printed with the specified stamp.
Important
• Depending on your usage environment, you may not be able to use the Stamp function. In this case,
set Spooling at Printer Driver in the Special Settings dialog box to Yes.
175
To Next Page
Loading...
Need help?
General