Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
Note
• This printer has the ability to estimate the media type by the data read by the sensor when the paper•
is set. If you continue to use this feature, you will learn the data that you read and the accuracy of the
media type estimation. If you continue to use multiple media types, this feature will reduce the need to
select the media type each time you set the paper.
Media type selection method
• If you continue using the same type of paper and set Media type selection method to Use current•
media type, when you load paper, the media type selected before Use current media type was set is
selected automatically, eliminating the need to set the media type.
Media type selection method
Important
• For best printing results, the printer fine-tunes the print head height and the feed amount for each type•
of paper. Be sure to select the type of paper to use correctly before printing.
1. Select paper settings display area on Home screen.1.
2.
Select Paper settings.
2.
3.
Select Type.
3.
4.
Select media type of roll paper loaded in printer.
4.
Important
•
Be sure to select the correct paper type. If this setting does not match the loaded paper, it may
•
cause feed errors and affect printing quality.
Note
•
For details on media types, see "Paper Information List."
•
282
To Next Page
Loading...
Need help?
General