5. Complete the setup5.
Click OK to return to the Layout tab.
The registered title appears in the Stamp list.
Changing and Registering Some of Stamp Settings
1. Select stamp1.
On the Layout tab, select the Stamp check box, and click Define Stamp....
The Define Stamp dialog box opens.
2.
Select the stamp for which the settings are to be changed
2.
From Stamps, select the title of the stamp you want to change the settings for.
3.
Configure each setting while viewing the preview
3.
4. Complete the setup4.
Click OK to return to the Layout tab.
The registered title appears in the Stamp list.
Note
•
The stamp registered as the default setting cannot be changed.
Deleting an Unnecessary Stamp
1. Select stamp1.
On the Layout tab, select the Stamp check box, and click Define Stamp....
The Define Stamp dialog box opens.
2. Select the stamp to be deleted2.
Select the title that you wish to delete from the Stamps and click Delete.
Click Yes when the confirmation message appears.
3.
Complete the setup
3.
Click OK to return to the Layout tab.
Note
•
The stamp registered as the default setting cannot be deleted.
178
To Next Page
Loading...
Need help?
General