You must install PosterArtist to use this function. Go to the Canon website, download PosterArtist,
and then install it.
Stamp
The Stamp function prints a specific character string over the document pages. You can select the
characters to be printed from a list or use the Define Stamp dialog box to set any characters.
Define Stamp...
Opens the Define Stamp dialog box.
You can specify detailed stamp settings or register any stamp.
Print Centered
Prints document in center of paper.
Rotate 180 degrees
Rotates document 180 degrees and prints it.
No Spaces at Top or Bottom
When printing on roll paper, you can save paper by reducing the upper and lower margins when
printing.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
Important
• If the application used to create your document has a similar function, specify the number of copies
with the application without specifying it here.
Print from Last Page
Check this check box when you want to print from the last page in order. If you do this, you do not
need to sort the pages into their correct order after printing.
Uncheck this check box to print your document in normal order, starting from the first page.
Collate
Check the check box when you are printing two or more copies, and want to print them in groups.
Uncheck the check box when you want to print them as a group on the same page.
Note
• Depending on the model you are using, the Collate setting may be unavailable.
Page Options...
Opens the Page Options dialog box.
You specify settings for printing information such as date, user name, and page number.
Important
• Depending on your usage environment, you may not be able to use the Page Options function. In
this case, set Spooling at Printer Driver in the Special Settings dialog box to Yes.
Special Settings...
Opens the Special Settings dialog box.
If you are unable to obtained the desired print results, you can change the print processing method.
234
To Next Page
Loading...
Need help?
General