Specifying Amount of Extension for Paper of sufficient width.
In case of Paper of sufficient width, the width of the original is set to be slightly smaller than the paper,
and there are margins on the left and right. You can reduce the margins by increasing the amount of
extension.
On the other hand, if the amount of extension is too large, the back side of the paper will be easily soiled
with the overflowed ink. When performing borderless printing with specifying the amount of extension for
Paper of sufficient width, clean the platen regularly.
Cleaning Inside the Top Cover
1.
Select paper settings display area on Home screen.
1.
2.
Select Paper settings.
2.
3.
Select Advanced.
3.
4. Select Extension for borderless printing.4.
5. Select Paper of sufficient width.5.
6. Select Sample of extension amounts.6.
7.
Confirm displayed message and select Yes.
7.
The alignment pattern for each adjustment value is printed.
8.
Select the adjustment value.
8.
297
To Next Page
Loading...
Need help?
General