Select Certificate Store screen is displayed.
8. Select Trusted Root Certification Authorities and OK.8.
9.
Select Next on Certificate Import Wizard screen.
9.
10.
If Completing the Certificate Import Wizard appears, select Finish.
10.
Security Warning screen is displayed.
11.
Make sure that thumbprint on Security Warning screen matches printer's thumbprint.
11.
To display the printer's root certificate thumbprint in Root cert. thumbprint (SHA-1) or Root cert.
thumbprint (SHA-256), select (Information) on the HOME screen of the operation panel, and
then select System information.
12.
If thumbprint on Security Warning screen matches printer's thumbprint, select Yes.
12.
13.
Select OK on Certificate Import Wizard screen.
13.
The root certificate registration is completed.
For Safari
1. Select For secure communication on Remote UI.1.
2. Select Download.2.
Downloading the root certificate is started.
3. Open the downloaded file.3.
Keychain access starts up and Add Certificates screen is displayed.
4.
Select Add.
4.
Information on the certificate is displayed.
Note
•
You can also add the certificate by selecting Show Certificate, checking certificate name to add,
and then selecting the same certificate on Keychain access.
5.
Make sure that fingerprint of certificate detail information matches printer's thumbprint.
5.
To display the printer's root certificate thumbprint in Root cert. thumbprint (SHA-1) or Root cert.
thumbprint (SHA-256), select (Information) on the HOME screen of the operation panel, and
then select System information.
461
To Next Page
Loading...
Need help?
General