2.
To use the optional stand, assemble the stand by referring to the Printer Stand Setup Guide
2.
that was provided with the stand.
Caution
• The stand must be assembled by at least two people on a flat surface. Attempting assembly by•
yourself poses a risk of injury or bending the Stand.
• When assembling the stand, lock all four of the casters. Attempting to move the stand when the•
casters are locked poses a risk of injury or damage to the location site.
• When moving the stand, make sure that the basket does not graze the floor and that all four of the•
casters are unlocked before moving the stand. Not doing so may damage the basket, scratch the
floor, or cause injuries.
• When placing the printer on the stand, lock all four of the casters of the stand. Attempting to place•
the printer on the stand while the casters are not locked poses a risk of injury.
3. Connect the power cord to the power cord connector on the right side of the printer.3.
4.
Plug the power cord into the outlet.
4.
5.
Turn on printer.
5.
621
To Next Page
Loading...
Need help?
General