1061
Cause
The media type specified in the print job is not the same as the media type loaded in the printer.
What to Do
Tap OK on the touch screen to go to the next screen.
Check the displayed media type and size, and tap OK.
• Printing again according to the media type•
Follow the steps below to match the media type in the print job and the media type loaded in the
printer.
â—¦ Changing the media type in the print jobâ—¦
1. Tap Cancel to stop printing.
2. Change the media type in the print job settings to the media type loaded in the printer, and2.
then try again.
Loading Rolls in the Printer
Loading Sheets in the Printer
â—¦ Replacing paperâ—¦
1. Tap Replace the paper and print.
2. Load the paper with the media type specified in the print job, and then try again.2.
Loading Rolls in the Printer
Loading Sheets in the Printer
• Printing with the current print settings•
To continue printing, tap Print with the loaded paper. on the touch screen.
However, note that this error may cause paper jams and affect the printing quality.
774
To Next Page
Loading...
Need help?
General