2132
Cause
Cannot print internal printer data, such as test prints, for the following reasons.
• The paper roll loaded in the printer is too small.
• The cut paper loaded in the printer is the wrong size or type.
What to Do
• Roll•
Tap Replace the paper and print on the touch screen, or tip back the release lever and replace the
paper with paper of the correct size.
Loading Rolls in the Printer
To stop printing, tap Cancel or Stop.
• Sheet•
Tip back the release lever, remove any paper, and then load paper of the same size and type as the
first page.
Loading Sheets in the Printer
To stop printing, tap Stop.
823
To Next Page
Loading...
Need help?
General