Canon iPF605 - Making Pre-Checks; Unpacking and Installation; Installation

Chapter 3
3-1
3.1 Installation
3.1.1 Making Pre-Checks
3.1.1.1 Making Pre-Checks
0019-6113
Package dimensions and weight are as follows.
Main body (with a palette): 1140 (W) mm x 914 (D) mm x 645 (H) mm, Approx. 69 kg
F-3-1
Installation space
Main body only: 1297 (W) mm x 1770 (D) mm x 644 (H) mm
Main body with stand: 1297 (W) mm x 1993 (D) mm x 1293 (H) mm
When printing from the Front Paper Feed Slot, leave at least 1,300 mm (51.2 in) of unobstructed space in front of the printer and 700 mm (27.6 in) behind it.
3.1.2 Unpacking and Installation
3.1.2.1 Unpacking and Installation
0019-6167
The printer must be moved with it held by three or more persons on both sides. Be careful not to get your lower back and other regions hurt.
F-3-2
When moving the printer, grasp the carrying handles [1] on the left and right side of the bottom.
Holding other portions can drop the printer and you may be injured.
F-3-3
+300mm
+300mm
+800mm
+150mm
+150mm
[1]
[1]