Canon iPF605 - 8.4 Sevice Call Table

Chapter 8
8-8
8.4 Sevice Call Table
8.4.1 Service Call Errors
0013-2081
*Codes correspond to the numbers shown on the DISPLAY in the service mode.
T-8-4
Code* Description Action
E141-4046 Number of recovery rotations reaching
50,000 or more
Replace the purge kit, and then clear the parts counter in
the service mode.
E144-4047 Ink supply count error Replace the ink supply unit, and then clear the parts
counter in the service mode.
E146-4001 Borderless/flow idle ejection/mist recovery
count error
Replace the platen duct or mist fan or mist filter or
suction fan, and then clear the parts counter in the service
mode.
E161-403E Abnormal temperature rise in printhead Replace the printhead.
E194-404A Non-discharging nozzle count error Replace the head management sensor unit, and then clear
the parts counter in the service mode.
E196-4034 Multi sensor unit version error Replace the multi sensor unit.
E196-4040 Checksum error Replace the main controller PCB.
E196-4041 Flash memory erase error Replace the main controller PCB.
E196-4042 Flash memory write error Replace the main controller PCB.
E196-4045 EEPROM write error Replace the main controller PCB.
E196-404C Serial number mismatch between boards Execute PCB replacement mode or replace the main
controller PCB.
E196-404D Machine ID mismatch between boards Replace the main controller PCB.
E196-404E EEPROM read error Replace the main controller PCB.
E198-401C RTC error Replace the lithium battery or replace the main controller
PCB.
E198-401D RTC low battery error Replace the lithium battery or replace the main controller
PCB.
E198-401E RTC clock stop Replace the lithium battery or replace the main controller
PCB.
E199-404B Temperature/humidity sensor board
connector out of position
Check the temperature/humidity sensor board connector
or replace the board.