Chapter 3
3-20
3.2.2 Reinstalling the Printer
3.2.2.1 Reinstalling the Printer
0013-4210
1. When installing the printer after moving it on the same floor having no step
If you have moved the printer to the installation site on the same floor having no step without draining ink, check the operation test pattern.
2. When installing the printer after moving it on the same floor having a step(s)
If you have moved the printer to the installation site on the same floor having a step(s) with ink drained, install it again in the same manner as that for initial instal-
lation after reception of the delivered printer.
1) Unpack the printer.
2) Remove the cushioning materials and tape from the printer.
3) Install the maintenance cartridge.
4) Remove the belt stopper.
5) Connect the power cord.
6) Turn on the Power button and install ink tanks according to the displayed messages.
Ink filling will starts.
Load paper and check for normal operation.
To Next Page
Loading...
