Canon iPF605 - Stand; IEEE1394 (Firewire) Board

Chapter 1
1-4
1.2.6 Stand
0016-8107
Stand (Option)
It is a stand that puts the printer. Equipped with casters so that the printer can be easily moved. The output stacker included with stand can use by the two ways of
the regular position or extended position.
F-1-11
MEMO:
- Use the output stacker in the regular position [A]. However, for the specified media, it can also be used in the extended position [B]. The media can be removed
more easily when the output stacker is in the extended position.
- The output stacker can accommodate one sheet. Remove each sheet before printing if you are printing a series of documents.
F-1-12
1.2.7 IEEE1394 (FireWire) Board
0016-8123
IEEE1394 (FireWire) expansion board (option)
An interface board that provides an additional IEEE1394 (FireWire) port.
F-1-13
[B][A]