Canon iPF605 - Page 183

Chapter 4
4-45
5) Remove the ten screws[1] and free the harness from harness guide[2] to remove the main controller PCB[3].
F-4-100
b) Removing the main controller mounting plate
1) Remove the main controller PCB.
2) Free the harness from the harness guide.
3) Remove the screw [1] and remove the flexible guide [2].
F-4-101
4) Remove the four screws [1] and two hooks [2] from the harness guide and remove the main controller mounting plate [3].
F-4-102
[1]
[2]
[3]
[1]
[1]
[1] [2]
[1]
[1]
[2]
[3]