Canon iPF755 - Configuring the Destination for Appletalk Networks

Note
• By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone
name.
For details on RemoteUI, see "Using RemoteUI." →P.764
Configuring the Destination (Mac OS X)
Important
• AppleTalk is supported in Mac OS X 10.2.8–10.4.
Note
• The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies
depending on the version of Mac OS X.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
1.
In System Preferences, click Network to display the Network window.
2. In Show, choose Built-in Ethernet. Next, click AppleTalk, select Make AppleTalk Active, and click Apply
now.
3. Close the Network window and save the settings.
Network Setting > Mac OS X Settings >
Configuring the Destination for AppleTalk Networks
iPF755
10
792